We – EPG Team the most significant gearbox & motors , couplings and gears manufacturing facility in China with 5 various branches. For more particulars: Cellular/whatsapp/telegram/Kakao us at: 0086~13083988828 13858117778083988828
Rubber Kneader, Rubber Dispersion Kneader, Kneader, Dispersion Mixer, Rubber Mixer, Inner Kneader X(S)N-75×30
Short Introduction for Our Rubber Kneader (plastics)
Mixing Chamber
It is made up of a “w” shape body and two aspect boards produced of substantial quality metal plates by signifies of extrusion forming and welding, which are jacked to get the circulation of cooling water or steam. It is plated with tough chrome on its interior walls.
Standard Observe Pump
Timing injection pump to the sealing system on a typical injection of hydraulic oil, lubrication sealing result.
Thermal Resistance (or thermal few)
There is a plug-in thermal resistance or thermal few in center area of the bottom of the chamber to be related to electrical system to inspect and management the mixing temperature.
Rotor
It is developed to the hollow blades of banbury type. The hollows are connected with axial gap of rotor shaft utilized as cooling or heating passage. The leading edges and the aspect faces of blades are floor welded with hard alloy and floor, then plated with tough chrome and polished.
Cooling/heating System
A frequent piping method is adopted for both cooling or heating content in mixing procedure. By means of the system cooling drinking water or steam is fed in a few techniques to the cavities of the rotors blades, – the jackets of the mixing chamber and the leading ram.
Tilting Mechanism
It is composed of a rotor with brake, cycloidal equipment reducer, TP sort worm and worm gear, and many others. It is capable to actuate the mixing chamber tilting by 140° Close to the entrance rotors.
Dust Quit Gadget
At the joint among the top of mixing chamber and the cantilevered arm of the equipment frame, the dust sealing assembled with curved slotted partings are used for getting an superb and dependable sealing function. The end confront of the rotor is sealed by stop contact sealing with non oil-lubrication and it seals effectively and is put on-resistance and sturdy.
Major Driving Program
The element is manufactured up with major motor, reducer, connecting gears. It realizes odd-speed rotation of rotors with working face one other.
Pneumatic handle program
Pneumatic manage method is controlled by PLC get. A bi-directional air cylinder tends to make the ram up or down. In scenario of the above load occurs when mixing chamber, the leading ram can be raised immediately or manually if needed, so as to protect motor from overloading.
Electrical Manage System
Imported PLC gadget and electric powered handle parts which are all imported items or imported technology products are adopted in the electrical management program as to raise handle reliability.
Dust Sealing System
Mixing chamber catchy interface rack cantilever the oil dust seals and timing effect oiling dust, unique composition, the use of copper components, very good sealing functionality, no leakage of the glue, powder leakage, do not pollute the environment, but also has simple servicing and long service life.
| Merchandise | Device | X(S)N-3×32 | X(S)N-5×32 | X(S)N-10×32 | X(S)N-20×32 | X(S)N-25×32 | X(S)N-35×30 | X(S)N-55×30 | X(S)N-75×30 | X(S)N-110×30 | X(S)N-150×30 | X(S)N-200×30 |
| Total Volume of Mixing Chamber | (L) | eight | fifteen | twenty five | 45 | fifty five | seventy five | a hundred twenty five | 170 | 250 | 325 | 440 |
| Working Volume of Mixing Chamber | (L) | three | 5 | 10 | 20 | 25 | 35 | 55 | seventy five | 110 | 150 | 200 |
| Driving Motor Power | (KW) | 5.five | 11 | 22 | 37 | 37 | fifty five | 75 | 110 | 185 | 220 | 280 |
| Titling Motor Electricity | (KW) | .fifty five | 1.one | one.1 | 1.5 | 1.5 | two.2 | two.two | four | five.five | eleven | 11 |
| Rotational Velocity of The Rotor (front/rear) | (r/min) | 30/24.five | 32/23.5 | 32/twenty five | 32/27 | 32/27 | thirty/24.5 | thirty/24.five | 30/24.5 | 30/24.5 | 30/24.5 | thirty/24.five |
| Stress of Compressed Air | (m³/min) | ≥0.3 | ≥0.5 | ≥0.five | ≥0.7 | ≥0.7 | ≥0.9 | ≥1. | ≥1. | ≥1.5 | ≥2. | ≥4. |
| Force of Cooling H2o(mixing rubber) | (MPa) | .2~.four | .2~.4 | .2~.4 | .2~.4 | .2~.four | .3~.four | .3~.four | .3~.four | .3~.4 | .3~.4 | .3~.four |
| Force of Heating Steam (plastic mixing) | (MPa) | .5~.8 | .5~.eight | .5~.eight | .5~.eight | .5~.8 | .5~.8 | .5~.8 | .5~.eight | .5~.eight | .5~.8 | .5~.eight |
| Proportions(LxWxH) | (mm) | 2000x1000x2220 | 1850x1200x2580 | 2640x1650x2350 | 2675x1650x2560 | 2675x1650x2560 | 3200x1900x2950 | 3230x1927x2958 | 3325x2615x3150 | 4075x2712x3580 | 4250x2750x4106 | 4250x3400x4215 |
| Gross Excess weight | (t) | ~two | ~2.one | ~3.3 | ~4 | ~4.five | ~6.3 | ~7.one | ~9.five | ~fourteen.nine | ~19.5 | ~22.5 |
The use of first equipment manufacturer’s (OEM) portion quantities or trademarks , e.g. CASE® and John Deere® are for reference needs only and for indicating solution use and compatibility. Our company and the outlined alternative areas contained herein are not sponsored, approved, or manufactured by the OEM.
