Item Description

G80 Variety Alloy Chain

* Alloy chain is designed and manufactured for superior performance and usage. 
* It can effortless stand up to much more abuse, abrasion resistance, better load lifting for every size.
* It is lighter to take care of for operations.
* Content alloy steel, warmth handled and evidence analyzed. 
* Protection issue 4: one
* Tougher and far more reliable for lifting software. 
* Lessen downtime procedure and much more tough surpassed security file. 
* End: Offered with self-coloured, black tempered, blue painted, and red painted. 
* Completely embossed with wanted marking for straightforward identification and traceability.  
* Regular: EN818-2.

Merchandise Title G80 lifting chain
Regular EN818-2, GB/T20652, GB/T12718, GB/T20946, DIN5685. 
Size 6mm-22mm
Substance Alloy steel/carbon metal/stainless steel
Energy Quality G43, G63, G70, G80
Elongation of Chain Breaking ≥ 16%
Attribute It can face up to a lot more abuse, abrasion resistance
Tougher and a lot more trustworthy for lifting software
Do 2.4 times of WLL producing validation toughness tensile examination. 
Basic safety element: Min. 5: one
Prolonged support daily life
Packing Record Plywood reel/plastic reel/plastic drum/gunny bag/iron drum+plywood pallet/iron pallet
Delivery Time 20~40days
Software G100 lifting chain is employed for overhead lifting, dragging, chain slings, and so on
Complete Self-colored, black tempered, electro galvanized, very hot DIP galvanized, painted.  

     

                    

Chain dia. 
B (mm)
Inside length
T (mm)
Inside width
B1. (mm)
Outside width
B2. (mm)
Working load 
(t)
Breaking load 
(t)
Weight
(kg/m)
3 nine three.eight ten.7 .36 14.1 .21
four 12 five fourteen.3 .sixty three twenty five.1 .35
5 fifteen 6.3 sixteen.five 1 three.16 .five
six eighteen 7.five 20 1.forty four four.fifty six .8
6.3 19.8 eight.two twenty.8 1.six 5 .84
7 21 9 24.5 1.92 six 1.one
7.1 21.3 nine 24.5 2 6.32 1.fifteen
eight 24 ten 28 two.five eight 1.four
9 27 11 31.five 3.15 ten.two 1.eighty two
10 30 12.five 35 four 12.eight 2.two
eleven 33 12.six 36.5 four.two 15.2 2.33
twelve 36 15 forty two four.6 18.four 3.one
13 39 16.3 forty six 5.3 21.2 three.7
fourteen 42 18 forty nine 6.three 25.2 four.13
15 46 20 52 7 28 five.17
16 forty eight twenty fifty six 8 32 five.63
18 fifty four 23 63 ten 40 6.85
19 fifty seven 23.seven 63.2 11.3 45.2 seven.8
20 60 25 70 12.five 50 eight.6
22 sixty six 28 77 fifteen.3 sixty one.two 11
24 72 32 82 eighteen 72 twelve.8
26 78 35 ninety one 21.three eighty five.2 14.9
32 ninety 38 one hundred and five 28.3 113.2 19.6
34 102 forty six.5 121.2 36.3 145.two 25.5
36 108 forty nine.5 128.5 forty.seven 162.eight 31
38 114 fifty two 136 45.3 181.two 32
forty two 126 55.5 144.5 55.four 221.six 38.6
forty eight a hundred and forty four sixty two.four 177.6 seventy two.3 289.two fifty two
50 a hundred and fifty 65 185 eighty 320 fifty six
fifty two 156 sixty seven.6 192.four 85 340 fifty nine
fifty six 168 seventy two.eight 207.two a hundred 400 72.5
sixty three 190 81.nine 233.1 125 500 89
72 210 ninety one 259 a hundred and sixty 640 110

If you need far more particulars or have any inquiries, you should come to feel free to contact us, we are much more than happy to do any help. Many thanks! 

US $0.3-5
/ Meter
|
200 Meters

(Min. Order)

###

Usage: Heavy Duty Lifting
Material: Alloy
Surface Treatment: Baking Paint
Feature: Heat Resistant
Chain Size: 7mm-13mm
Structure: Welded Chain

###

Samples:
US$ 2/Meter
1 Meter(Min.Order)

|
Request Sample

###

Customization:

###

Product Name G80 lifting chain
Standard EN818-2, GB/T20652, GB/T12718, GB/T20946, DIN5685. 
Size 6mm-22mm
Material Alloy steel/carbon steel/stainless steel
Strength Grade G43, G63, G70, G80
Elongation of Chain Breaking ≥ 16%
Feature It can withstand more abuse, abrasion resistance
Tougher and more reliable for lifting application
Do 2.4 times of WLL manufacturing validation strength tensile test. 
Safety factor: Min. 5: 1
Long service life
Packing List Plywood reel/plastic reel/plastic drum/gunny bag/iron drum+plywood pallet/iron pallet
Delivery Time 20~40days
Application G100 lifting chain is used for overhead lifting, dragging, chain slings, etc
Finish Self-colored, black tempered, electro galvanized, hot DIP galvanized, painted.  

###

Chain dia. 
B (mm)
Inside length
T (mm)
Inside width
B1. (mm)
Outside width
B2. (mm)
Working load 
(t)
Breaking load 
(t)
Weight
(kg/m)
3 9 3.8 10.7 0.36 14.1 0.21
4 12 5 14.3 0.63 25.1 0.35
5 15 6.3 16.5 1 3.16 0.5
6 18 7.5 20 1.44 4.56 0.8
6.3 19.8 8.2 20.8 1.6 5 0.84
7 21 9 24.5 1.92 6 1.1
7.1 21.3 9 24.5 2 6.32 1.15
8 24 10 28 2.5 8 1.4
9 27 11 31.5 3.15 10.2 1.82
10 30 12.5 35 4 12.8 2.2
11 33 12.6 36.5 4.2 15.2 2.33
12 36 15 42 4.6 18.4 3.1
13 39 16.3 46 5.3 21.2 3.7
14 42 18 49 6.3 25.2 4.13
15 46 20 52 7 28 5.17
16 48 20 56 8 32 5.63
18 54 23 63 10 40 6.85
19 57 23.7 63.2 11.3 45.2 7.8
20 60 25 70 12.5 50 8.6
22 66 28 77 15.3 61.2 11
24 72 32 82 18 72 12.8
26 78 35 91 21.3 85.2 14.9
32 90 38 105 28.3 113.2 19.6
34 102 46.5 121.2 36.3 145.2 25.5
36 108 49.5 128.5 40.7 162.8 31
38 114 52 136 45.3 181.2 32
42 126 55.5 144.5 55.4 221.6 38.6
48 144 62.4 177.6 72.3 289.2 52
50 150 65 185 80 320 56
52 156 67.6 192.4 85 340 59
56 168 72.8 207.2 100 400 72.5
63 190 81.9 233.1 125 500 89
72 210 91 259 160 640 110
US $0.3-5
/ Meter
|
200 Meters

(Min. Order)

###

Usage: Heavy Duty Lifting
Material: Alloy
Surface Treatment: Baking Paint
Feature: Heat Resistant
Chain Size: 7mm-13mm
Structure: Welded Chain

###

Samples:
US$ 2/Meter
1 Meter(Min.Order)

|
Request Sample

###

Customization:

###

Product Name G80 lifting chain
Standard EN818-2, GB/T20652, GB/T12718, GB/T20946, DIN5685. 
Size 6mm-22mm
Material Alloy steel/carbon steel/stainless steel
Strength Grade G43, G63, G70, G80
Elongation of Chain Breaking ≥ 16%
Feature It can withstand more abuse, abrasion resistance
Tougher and more reliable for lifting application
Do 2.4 times of WLL manufacturing validation strength tensile test. 
Safety factor: Min. 5: 1
Long service life
Packing List Plywood reel/plastic reel/plastic drum/gunny bag/iron drum+plywood pallet/iron pallet
Delivery Time 20~40days
Application G100 lifting chain is used for overhead lifting, dragging, chain slings, etc
Finish Self-colored, black tempered, electro galvanized, hot DIP galvanized, painted.  

###

Chain dia. 
B (mm)
Inside length
T (mm)
Inside width
B1. (mm)
Outside width
B2. (mm)
Working load 
(t)
Breaking load 
(t)
Weight
(kg/m)
3 9 3.8 10.7 0.36 14.1 0.21
4 12 5 14.3 0.63 25.1 0.35
5 15 6.3 16.5 1 3.16 0.5
6 18 7.5 20 1.44 4.56 0.8
6.3 19.8 8.2 20.8 1.6 5 0.84
7 21 9 24.5 1.92 6 1.1
7.1 21.3 9 24.5 2 6.32 1.15
8 24 10 28 2.5 8 1.4
9 27 11 31.5 3.15 10.2 1.82
10 30 12.5 35 4 12.8 2.2
11 33 12.6 36.5 4.2 15.2 2.33
12 36 15 42 4.6 18.4 3.1
13 39 16.3 46 5.3 21.2 3.7
14 42 18 49 6.3 25.2 4.13
15 46 20 52 7 28 5.17
16 48 20 56 8 32 5.63
18 54 23 63 10 40 6.85
19 57 23.7 63.2 11.3 45.2 7.8
20 60 25 70 12.5 50 8.6
22 66 28 77 15.3 61.2 11
24 72 32 82 18 72 12.8
26 78 35 91 21.3 85.2 14.9
32 90 38 105 28.3 113.2 19.6
34 102 46.5 121.2 36.3 145.2 25.5
36 108 49.5 128.5 40.7 162.8 31
38 114 52 136 45.3 181.2 32
42 126 55.5 144.5 55.4 221.6 38.6
48 144 62.4 177.6 72.3 289.2 52
50 150 65 185 80 320 56
52 156 67.6 192.4 85 340 59
56 168 72.8 207.2 100 400 72.5
63 190 81.9 233.1 125 500 89
72 210 91 259 160 640 110

Advantages and Disadvantages of Drive Chains

Drive chains are widely used for sliding steel guides. While solution chains are often used, roller chains are more efficient in size and weight. Nevertheless, a drive chain is often the best choice for dirty jobs. The following are some of the benefits and disadvantages of drive chains. Learn more! Adapt your vehicle to your specific situation with drive chains. You’ll be glad you did! Read on to learn more! Continue reading for information on different types of drive chains.

Inverted tooth chain

An inverted tooth camshaft drive chain has teeth on its links and two pin rolling pivot joints that engage each other to transmit moderate to high-speed rotations. This type of drive chain is also known as a silent chain drive, which is particularly effective in reducing noise and vibration. The teeth on the links mesh perfectly with the teeth of the gear sprocket. The inverted tooth design also provides smooth communication of chain links with the teeth of the sprocket.
The design of the new model was particularly effective in quelling noise. The “Druid” spring forks enabled the chain to adjust with minimal motion of the axle. It was launched at the 1910 Olympia show and sold more than 500 units. The drive chain was also silent, which reduced the need for sound insulation and attenuation components, which in turn minimized weight. Hence, it became an ideal choice for wind turbines.
The main disadvantages of chain drive include its low speed and limited range. It is expensive to manufacture and requires precise mounting. Maintenance is essential, including lubrication and slack adjustment. Its velocity fluctuates as the chain is stretched. This causes the chain to fail at the worst possible time. The chain drive also has problems associated with slippage. In addition, it can be prone to excessive wear and tear. Fortunately, however, there are newer types of drive chains available, which are more durable and reliable.
chain

Duplex chain

There are three types of duplex drive chains: SC, RP, and Ramsey. Each has their own unique advantages and features. The Rampower duplex series offers twice the power capacity of the standard SC duplex chain. They are often used in new applications. SC duplex chains are the most affordable and are used in less demanding applications. The SC duplex chain has a lower power capacity but lower weight. There is also no guarantee of performance.

Multi-strand roller chain

The Multiple-strand roller chain for drive chain market can be defined on the basis of the factors that drive growth in this industry. The factors that hamper market growth can be understood in order to come up with alternative bends for lucrative opportunities. This report aims to understand the current scenario and the impact of COVID-19 on the industry as a whole. We will also discuss the market drivers and restraints. We will discuss the various types of Multiple-strand roller chains for drive chain and their market sizes in the coming years.
The minimum tensile strength for a roller chain is one sixth or one-ninth the tensile strength of a conventional drive chain. These standards are established to prevent linkplate fatigue, which is the main cause of premature breakdown. A chain made of this material is considered a superior choice for high-performance applications involving a high load-bearing capacity. If you’re using a drive chain, make sure to choose a proper chain based on the type of application. A simple chain with a high load-bearing capacity is also ideal for simple applications.
While it is true that a high-tension, high-speed drive requires a higher power rating than a low-speed chain, roller chains are primarily used in low to mid-speed applications. They are similar to bicycle chains but may have a master link. In motorcycles, chains are heavier and may require a chain tool to remove. These chains are often replaced with toothed belts or a combination of both.

Flat top chain

The flat top drive chain is a versatile conveyor belt that conveys medium and large workpiece pallets. Its arcing capacity makes it suitable for continuous drive combinations involving curve arcs. The flat top chain is also available with PA wear pads on the workpiece pallets. The flat top chain’s steel and plastic glide profiles allow surface loads of up to 1.5 kg/cm. HD profiles are compatible with the flat top chain.
The steel flat top chain is available in several types: 815, 820, and 881 series. These are heat-treated to have high strength and excellent wear resistance. They can also be used with various sprockets, including 820 sprockets. The high-quality steel chain can be used with many industrial applications. However, if you are looking for a durable chain for your industrial application, iwis hardened stainless steel flat top chains are an excellent choice.
TSplus flat top drive chain offers the most flexibility of any conveying media. The drive units can be linked end-to-end to form extended conveyor lines. Side-flexing flat top chains are available to create serpentine, in-line, and carousel conveyors. Drive units are available in standard and heavy-duty models. They are versatile enough to handle a variety of container sizes. If you need a more complex conveyor system, you can choose a heavy-duty drive chain.
Rexnord flat top chains come in two basic styles: MatTop chain and TableTop chain. The TableTop chain is molded in standard widths ranging from 3.25 inches to 12 inches. These are shipped in ten-foot sections, but you can also find 20-foot-wide mattop chains. You can even customize your MatTop chain to meet your exact needs. They are perfect for a variety of conveying applications, from general conveying to wash down applications.
chain

Conveyor chain

Drive chains for conveyors come in a variety of styles. These chains can have varying degrees of pitch. Pitch is governed by wheel tooth strength, the overall chain rigidity, and the type of drive motor. A normal maximum pitch is determined by the width of the link plates and the angle between the mounting angles. You can increase the pitch of your chain by strengthening the bushes between the link plates. Make sure that the gap between the wheel teeth and the bushes is approximately one-fourth inch.
Pitch and tension of the chain are important considerations when choosing a chain. The minimum pitch is determined by the thickness of the tooth on the wheel and the maximum pitch is determined by the rigidity of the link plates. However, this maximum pitch may be exceeded with bushes between the link plates or clearance with the wheel teeth. A good quality chain will have bearing surfaces lubricated to prevent excessive wear and rust. Medium-viscosity mineral oil is suitable for normal operating conditions. SAE 20W-50 is a good choice for this application. Self-lubricating chains are available from many chain manufacturers.
The chain is usually lubricated by dripping oil between the links. This type of lubrication requires regular inspection of the conveyor chain. The amount of oil should be enough to prevent reddish brown discoloration on the chain joints. A lubricating oil should be applied on a daily basis, according to the manufacturer’s specifications. In order to ensure a longer life for your drive chain, make sure that you lubricate it on a regular basis.

China Rigging Hardware G80 Lifting Welded Steel Chain with High Capacity     a2040 roller chainChina Rigging Hardware G80 Lifting Welded Steel Chain with High Capacity     a2040 roller chain
editor by czh 2023-01-06