Item Description
A Sequence Brief pitch Precision Simplex Roller Chains & Bush Chains
ISO/ANSI/ DIN Chain No. |
Chain No. | Pitch P mm |
Roller diameter
d1max |
Width in between inner plates b1min mm |
Pin diameter
d2max |
Pin length | Inner plate depth h2max mm |
Plate thickness Tmax mm |
Tensile energy
Qmin |
Average tensile power Q0 kN |
Weight for every meter q kg/m |
|
Lmax mm |
Lcmax mm |
|||||||||||
fifteen | *03C | four.7625 | 2.48 | 2.38 | one.sixty two | 6.10 | 6.90 | four.thirty | .60 | 1.eighty/409 | two. | .08 |
*twenty five | *04C-one | 6.3500 | 3.thirty | three.18 | 2.31 | seven.ninety | 8.forty | 6.00 | .80 | three.50/795 | 5. | .15 |
*35 | *06C-1 | nine.5250 | 5.08 | 4.seventy seven | 3.fifty eight | 12.40 | thirteen.seventeen | 9.00 | 1.thirty | seven.90/1795 | eleven.3 | .33 |
41 | 085-1 | twelve.7000 | 7.77 | six.twenty five | three.58 | thirteen.seventy five | 15.00 | 9.ninety one | 1.thirty | six.67/1516 | twelve.6 | .forty one |
40 | 08A-1 | 12.7000 | 7.95 | 7.eighty five | 3.ninety six | 16.sixty | 17.80 | twelve.00 | one.50 | fourteen.ten/3205 | eighteen.6 | .62 |
50 | 10A-1 | fifteen.8750 | 10.16 | 9.forty | 5.08 | twenty.70 | 22.twenty | fifteen.09 | 2.03 | 22.twenty/5045 | 31.three | 1.02 |
sixty | 12A-one | 19.0500 | 11.91 | twelve.fifty seven | five.ninety four | twenty five.90 | 27.70 | eighteen.00 | two.42 | 31.80/7227 | 43.two | one.50 |
eighty | 16A-1 | twenty five.4000 | 15.88 | fifteen.seventy five | seven.ninety two | 32.70 | 35.00 | 24.00 | three.25 | 56.70/12886 | seventy four.3 | two.60 |
one hundred | 20A-1 | 31.7500 | 19.05 | 18.ninety | 9.fifty three | forty.40 | forty four.70 | 30.00 | four.00 | 88.50/20114 | 107.6 | 3.ninety one |
120 | 24A-one | 38.one thousand | 22.23 | 25.22 | 11.10 | 50.thirty | fifty four.30 | 35.70 | four.eighty | 127.00/28864 | 163.1 | five.62 |
one hundred forty | 28A-1 | 44.4500 | 25.40 | twenty five.22 | 12.70 | 54.40 | 59.00 | 41.00 | five.sixty | 172.40/39182 | 222.five | seven.50 |
a hundred and sixty | 32A-1 | fifty.8000 | 28.58 | 31.55 | fourteen.27 | sixty four.80 | 69.60 | 47.eighty | six.forty | 226.80/51545 | 266.nine | 10.ten |
180 | 36A-one | 57.1500 | 35.71 | 35.48 | seventeen.forty six | 72.80 | 78.sixty | fifty three.60 | seven.twenty | 280.twenty/63682 | 361.1 | 13.45 |
200 | 40A-1 | 63.5000 | 39.68 | 37.eighty five | 19.eighty five | eighty.thirty | 87.20 | 60.00 | 8.00 | 353.80/80409 | 466.eight | sixteen.fifteen |
240 | 48A-1 | 76.2000 | forty seven.sixty three | forty seven.35 | 23.81 | 95.50 | 103.00 | 72.39 | nine.50 | 510.30/115977 | 671.6 | 23.20 |
*Bush chain:d1 in the table indicates the exterior diameter of the bush
A Series Limited Pitch Precision Duplex Roller Chains & Bush Chains
ISO/ANSI/ DIN Chain No. |
Chain No. | Pitch
P |
Roller diameter
d1max |
Width in between inner plates b1min mm |
Pin diameter
d2max |
Pin length | Inner plate depth h2max mm |
Plate thickness
Tmax |
Transverse pitch
Pt |
Tensile toughness Qmin |
Average tensile toughness Q0 kN |
Weight per meter q kg/m |
|
Lmax mm |
Lcmax mm |
||||||||||||
*25-2 | *04C-two | six.350 | 3.thirty | three.eighteen | 2.31 | fourteen.five | 15. | 6.00 | .eighty | 6.40 | 7.00/1591 | ten. | .28 |
*35-two | *06C-2 | nine.525 | 5.08 | 4.seventy seven | 3.fifty eight | 22.five | 23.3 | nine.00 | 1.thirty | ten.thirteen | fifteen.80/3591 | 22.3 | .63 |
41-two | 085-two | twelve.seven hundred | seven.seventy seven | six.twenty five | three.fifty eight | 25.seven | 26.9 | nine.ninety one | one.thirty | 11.ninety five | 13.34/3032 | sixteen.9 | .eighty one |
forty-2 | 08A-two | 12.seven-hundred | seven.ninety five | seven.85 | 3.ninety six | 31. | 32.two | 12.00 | one.50 | 14.38 | 28.20/6409 | 37.2 | one.12 |
fifty-2 | 10A-two | 15.875 | 10.sixteen | 9.40 | 5.08 | 38.nine | forty.four | fifteen.09 | 2.03 | 18.11 | 44.40/10091 | sixty two.six | two.00 |
60-two | 12A-2 | 19.050 | 11.ninety one | 12.fifty seven | 5.94 | 48.eight | fifty.5 | eighteen.00 | two.42 | 22.seventy eight | 63.sixty/14455 | 86.four | 2.92 |
eighty-two | 16A-two | 25.four hundred | fifteen.88 | fifteen.75 | seven.92 | 62.7 | sixty four.3 | 24.00 | three.twenty five | 29.29 | 113.forty/25773 | 148.6 | 5.fifteen |
a hundred-two | 20A-two | 31.750 | 19.05 | 18.ninety | 9.53 | seventy six.four | 80.five | 30.00 | four.00 | 35.seventy six | 177.00/45717 | 215.2 | seven.80 |
one hundred twenty-2 | 24A-2 | 38.a hundred | 22.23 | 25.22 | eleven.10 | ninety five.8 | 99.7 | 35.70 | 4.eighty | forty five.44 | 254.00/57727 | 326.2 | 11.70 |
one hundred forty-two | 28A-two | forty four.450 | twenty five.forty | 25.22 | 12.70 | 103.three | 107.nine | forty one.00 | five.sixty | 48.87 | 344.80/78364 | 445. | fifteen.fourteen |
160-two | 32A-2 | fifty.800 | 28.fifty eight | 31.fifty five | fourteen.27 | 123.three | 128.one | forty seven.eighty | six.40 | 58.fifty five | 453.60/103091 | 533.8 | twenty.14 |
one hundred eighty-2 | 36A-two | fifty seven.150 | 35.seventy one | 35.forty eight | 17.forty six | 138.six | 144.4 | 53.sixty | 7.20 | 65.eighty four | 560.fifty/127386 | 722.two | 29.22 |
200-two | 40A-2 | 63.500 | 39.68 | 37.eighty five | 19.85 | 151.nine | 158.8 | sixty.00 | eight.00 | 71.55 | 707.sixty/16 0571 | 933.6 | 32.24 |
240-2 | 48A-2 | seventy six.two hundred | 47.sixty three | 47.35 | 23.eighty one | 183.four | one hundred ninety.eight | seventy two.39 | nine.50 | 87.83 | 1571.sixty/213955 | 1343.2 | 45.23 |
*Bush chain: d1 in the table indicates the exterior diameter of the bush
B Sequence Short pitch Precision Simplex Roller Chains & Bush Chains
ISO/DIN Chain No. |
Pitch
P |
Roller diameter
d1max |
Width among inner plates b1min mm |
Pin diameter
d2max |
Pin size | Inner plate depth h2max mm |
Plate thickness
t/Tmax |
Tensile strength
Qmin |
Average tensile toughness
Q0 |
Weight for every meter q kg/m |
|
Lmax mm |
Lcmax mm |
||||||||||
04 | 6.000 | four.00 | 2.eighty | one.eighty five | 6.eighty | 7.8 | five.00 | .sixty | three./682 | three.2 | .11 |
05B-1 | eight.000 | 5.00 | 3.00 | two.31 | eight.20 | eight.nine | seven.ten | .eighty | 5./1136 | five.nine | .20 |
*06B-1 | nine.525 | six.35 | five.72 | 3.28 | 13.fifteen | fourteen.one | 8.twenty | 1.30 | nine./2045 | 10.4 | .41 |
08B-one | 12.seven-hundred | 8.fifty one | seven.75 | 4.45 | 16.70 | 18.two | 11.eighty | 1.60 | 18./4091 | 19.4 | .sixty nine |
10B-1 | 15.875 | 10.16 | nine.65 | five.08 | 19.fifty | twenty.nine | 14.70 | one.70 | 22.4/5091 | 27.5 | .ninety three |
12B-one | 19.050 | 12.07 | eleven.sixty eight | 5.seventy two | 22.fifty | 24.2 | sixteen.00 | one.85 | 29./6591 | 32.two | 1.15 |
16B-one | 25.four hundred | fifteen.88 | 17.02 | eight.28 | 36.10 | 37.four | 21.00 | four.15/3.one | sixty./13636 | seventy seven.one | 2.seventy one |
20B-one | 31.750 | 19.05 | 19.fifty six | 10.19 | 41.thirty | 45. | 26.40 | four.50/3.five | ninety five./21591 | 112.8 | three.70 |
24B-one | 38.a hundred | 25.forty | 25.forty | fourteen.sixty three | fifty three.forty | 57.eight | 33.20 | 6.00/4.eight | 160./36364 | 178. | seven.ten |
28B-one | 44.450 | 27.ninety four | thirty.ninety nine | 15.ninety | sixty five.10 | sixty nine.5 | 36.70 | 7.fifty/6. | two hundred./45455 | 236.four | eight.fifty |
32B-one | fifty.800 | 29.21 | thirty.ninety nine | 17.81 | 66.00 | seventy one. | 42.00 | 7.00/6. | 250./56818 | 277.5 | ten.twenty five |
40B-1 | 63.five hundred | 39.37 | 38.ten | 22.89 | eighty two.20 | 89.2 | 52.96 | 8.fifty/8. | 355./80682 | 394. | 16.35 |
48B-one | seventy six.two hundred | 48.26 | forty five.seventy two | 29.24 | ninety nine.10 | 107. | sixty three.80 | 12.00/10. | 560./127272 | 621.six | 25.00 |
56B-one | 88.900 | 53.98 | 53.34 | 34.32 | 114.6 | 123. | seventy seven.80 | thirteen.fifty/12. | 850./193180 | 940. | 35.78 |
64B-1 | one zero one.600 | sixty three.fifty | sixty.ninety six | 39.40 | a hundred thirty. | 138.5 | 90.seventeen | fifteen.00/thirteen. | 112./254544 | 1240. | 46.00 |
72B-one | 114.300 | 72.39 | sixty eight.58 | forty four.48 | 147.4 | 156.four | 103.60 | 17.00/fifteen. | 1400./318180 | 1550. | 60.eighty |
*Straight facet plates
B Series Quick pitch Precision Duplex Roller Chains & Bush Chains
ISO/DIN Chain No. |
Pitch
P |
Roller diameter
d1max |
Width among inner plates b1min mm |
Pin diameter
d2 max |
Pin size | Inner plate depth h2max mm |
Plate thickness
t/Tmax |
Transverse pitch
Pt mm |
Tensile strength
Qmin |
Average tensile energy Q0 |
Weight for every meter q kg/m |
|
Lmax mm |
Lcmax mm |
|||||||||||
05B-2 | 8.000 | 5.00 | 3.00 | 2.31 | thirteen.nine | 14.five | seven.10 | .eighty | five.sixty four | 7.8/1773 | 10.two | .33 |
*06B-2 | nine.525 | 6.35 | five.seventy two | three.28 | 23.four | 24.4 | 8.twenty | 1.thirty | 10.24 | sixteen.9/3841 | eighteen.seven | .seventy seven |
08B-2 | 12.seven-hundred | 8.51 | 7.seventy five | 4.45 | 31. | 32.2 | eleven.80 | one.sixty | 13.ninety two | 32./7273 | 38.7 | one.34 |
10B-2 | 15.875 | 10.sixteen | 9.65 | five.08 | 36.one | 37.5 | 14.70 | one.70 | sixteen.59 | forty four.5/10114 | 56.2 | one.eighty four |
12B-two | 19.050 | 12.07 | 11.68 | 5.seventy two | 42. | forty three.six | sixteen.00 | one.85 | 19.46 | 57.8/13136 | 66.1 | 2.31 |
16B-2 | twenty five.four hundred | fifteen.88 | seventeen.02 | 8.28 | 68. | sixty nine.3 | 21.00 | 4.fifteen/3.one | 31.88 | 106./24091 | 152.one | five.42 |
20B-2 | 31.750 | 19.05 | 19.56 | ten.19 | seventy seven.eight | 81.five | 26.forty | 4.fifty/3.5 | 36.45 | 170./38636 | 229. | seven.twenty |
24B-2 | 38.100 | twenty five.forty | 25.40 | 14.sixty three | a hundred and one.7 | 106.2 | 33.20 | 6.00/4.eight | forty eight.36 | 280./63636 | 319.2 | thirteen.forty |
28B-2 | forty four.450 | 27.ninety four | 30.99 | fifteen.90 | 124.six | 129.one | 36.70 | seven.50/6. | fifty nine.56 | 360./81818 | 406.eight | sixteen.sixty |
32B-2 | 50.800 | 29.21 | 30.99 | seventeen.81 | 124.six | 129.six | 42.00 | seven.00/6. | fifty eight.55 | 450./157173 | 508.5 | 21.00 |
40B-2 | 63.500 | 39.37 | 38.10 | 22.89 | 154.five | 161.5 | 52.96 | eight.50/8. | seventy two.29 | 630./143182 | 711.9 | 32.00 |
48B-two | seventy six.200 | forty eight.26 | forty five.seventy two | 29.24 | 190.four | 198.two | 63.80 | twelve.00/ten. | 91.21 | 1000./227272 | 1130. | 50.00 |
56B-2 | 88.900 | fifty three.98 | fifty three.34 | 34.32 | 221.2 | 229.6 | 77.eighty | thirteen.fifty/twelve. | 106.sixty | 1600./363635 | 1760. | 71.forty eight |
64B-two | a hundred and one.600 | 63.fifty | sixty.ninety six | 39.forty | 249.9 | 258.4 | 90.seventeen | fifteen.00/13. | 119.89 | 2000./454544 | 2200. | 91.00 |
72B-2 | 114.three hundred | seventy two.39 | 68.fifty eight | forty four.forty eight | 283.7 | 292.7 | 103.sixty | 17.00/15. | 136.27 | 2500./568180 | 2750. | one hundred twenty.40 |
*Straight facet plates
Heavy Duty Collection Simplex Roller Chains & Bush Chains
ISO/ANSI Chain No. |
Pitch
P |
Roller diameter
d1max |
Width in between inner plates b1min mm |
Pin diameter
d2max |
Pin duration | Inner plate depth h2max mm |
Plate thickness
Tmax |
Tensile toughness
Qmin |
Average tensile strength Q0 kN |
Weight for every meter q kg/m |
|
Lmax mm |
Lcmax mm |
||||||||||
*35H-one | nine.525 | 5.08 | four.77 | 3.58 | 13.3 | 14.three | 9.00 | one.fifty | seven.9/1795 | 10.8 | .41 |
40H-one | twelve.seven hundred | seven.95 | seven.85 | 3.96 | eighteen.8 | 19.nine | twelve.00 | two.03 | fourteen.1/3205 | 19.one | .eighty two |
50H-one | 15.875 | ten.16 | nine.forty | 5.08 | 22.one | 23.four | 15.09 | two.forty two | 22.2/5045 | thirty.two | one.twenty five |
60H-1 | 19.050 | eleven.91 | 12.fifty seven | five.94 | 29.2 | 31. | 18.00 | three.25 | 31.8/7227 | 42.seven | 1.87 |
80H-1 | twenty five.400 | fifteen.88 | 15.75 | seven.92 | 36.two | 37.7 | 24.00 | 4.00 | 56.7/12886 | seventy one.four | 3.ten |
100H-one | 31.750 | 19.05 | eighteen.ninety | nine.fifty three | 43.six | forty six.nine | 30.00 | 4.eighty | 88.5/20114 | 112.4 | four.52 |
120H-one | 38.one hundred | 22.23 | twenty five.22 | 11.10 | 53.5 | fifty seven.5 | 35.70 | five.sixty | 127./28864 | a hundred and sixty.nine | 6.60 |
140H-1 | forty four.450 | 25.forty | twenty five.22 | 12.70 | 57.6 | sixty two.two | 41.00 | 6.40 | 172.4/39182 | 217.3 | eight.thirty |
160H-one | fifty.800 | 28.58 | 31.fifty five | fourteen.27 | sixty eight.2 | 73. | 47.eighty | 7.twenty | 226.8/51545 | 285.eight | 10.thirty |
180H-one | 57.a hundred and fifty | 35.seventy one | 35.48 | 17.46 | seventy five.nine | eighty one.6 | fifty three.sixty | 8.00 | 281./63863 | 341.8 | fourteen.83 |
200H-1 | 63.500 | 39.68 | 37.85 | 19.eighty five | 86.six | 93.five | sixty.00 | 9.fifty | 353.8/80409 | 444.five | 19.16 |
240H-one | seventy six.200 | forty seven.sixty three | 47.35 | 23.81 | 109.6 | one hundred fifteen.9 | seventy two.thirty | 12.70 | 510.3/115977 | 622.5 | 30.40 |
*Bush chain:d1 in the desk signifies the exterior diameter of the bush
Hefty Obligation Collection Duplex Roller Chains & Bush Chains
ISO/ANSI |
Pitch P mm |
Roller diameter
d1max |
Width in between inner plates b1min mm |
Pin diameter
d2max |
Pin length | Inner plate depth h2max mm |
Plate thickness Tmax mm |
Transverse pitch
Pt mm |
Tensile energy Qmin kN/lbf |
Average tensile toughness Q0 kN |
Weight for every meter q kg/m |
|
Lmax mm |
Lcmax mm |
|||||||||||
60H-2 | 19.050 | eleven.91 | twelve.fifty seven | 5.94 | 55.3 | 57.1 | 18.00 | three.twenty five | 26.11 | sixty three.6/14455 | 84.5 | 3.seventy one |
80H-2 | twenty five.four hundred | fifteen.88 | 15.seventy five | 7.92 | 68.8 | 70.three | 24.00 | 4.00 | 32.fifty nine | 113.4/25773 | 145.three | six.15 |
100H-two | 31.750 | 19.05 | eighteen.ninety | nine.fifty three | 82.7 | 86. | 30.00 | four.eighty | 39.09 | 177./45717 | 225.nine | 9.03 |
120H-2 | 38.a hundred | 22.23 | 25.22 | 11.ten | 102.4 | 106.4 | 35.70 | 5.60 | forty eight.87 | 254./57727 | 322.seven | thirteen.13 |
140H-2 | forty four.450 | twenty five.forty | twenty five.22 | 12.70 | 109.8 | 114.four | 41.00 | 6.40 | 52.20 | 344.8/78364 | 437.7 | 16.60 |
160H-2 | 50.800 | 28.fifty eight | 31.55 | fourteen.27 | a hundred thirty.1 | 134.nine | 47.80 | 7.20 | 61.90 | 453.6/103091 | 571.6 | twenty.twenty |
180H-two | 57.one hundred fifty | 35.71 | 35.48 | 17.forty six | 146.five | a hundred and fifty five.6 | fifty three.sixty | eight.00 | 69.sixteen | 562/127726 | 680. | 29.20 |
200H-2 | sixty three.five hundred | 39.68 | 37.85 | 19.eighty five | 164.nine | 171.8 | sixty.00 | 9.50 | 78.31 | 707.6/sixteen 0571 | 894.9 | 38.eleven |
240H-two | seventy six.two hundred | forty seven.sixty three | forty seven.35 | 23.eighty one | 212.six | 223.one | seventy two.thirty | 12.70 | one hundred and one.22 | one thousand/227270 | 1200. | 60.50 |
Chain Photographs
ROLLER CHAIN
Roller chain or bush roller chain is the variety of chain generate most typically employed for transmission of mechanical power on several sorts of domestic, industrial and agricultural equipment, which includes conveyors, wire- and tube-drawing equipment, printing presses, automobiles, motorcycles, and bicycles. It is made up of a series of quick cylindrical rollers held collectively by facet hyperlinks. It is pushed by a toothed wheel known as a sprocket. It is a simple, dependable, and productive implies of power transmission.
CHAIN STHangZhouRDS
Specifications corporations (this kind of as ANSI and ISO) preserve standards for layout, proportions, and interchangeability of transmission chains. For example, the pursuing Desk demonstrates data from ANSI standard B29.1-2011 (Precision Electricity Transmission Roller Chains, Attachments, and Sprockets) designed by the American Modern society of Mechanical Engineers (ASME). See the references[8][9][ten] for added details.
ASME/ANSI B29.1-2011 Roller Chain Standard SizesSizePitchMaximum Roller DiameterMinimum Final Tensile StrengthMeasuring Load25
ASME/ANSI B29.1-2011 Roller Chain Common Sizes | ||||
Dimension | Pitch | Highest Roller Diameter | Least Ultimate Tensile Power | Measuring Load |
---|---|---|---|---|
25 | .250 in (6.35 mm) | .a hundred thirty in (3.thirty mm) | 780 lb (350 kg) | eighteen lb (8.2 kg) |
35 | .375 in (9.53 mm) | .two hundred in (5.08 mm) | one,760 lb (800 kg) | 18 lb (8.2 kg) |
forty one | .five hundred in (12.70 mm) | .306 in (7.77 mm) | one,500 lb (680 kg) | eighteen lb (8.2 kg) |
40 | .five hundred in (twelve.70 mm) | .312 in (7.92 mm) | 3,125 lb (1,417 kg) | 31 lb (fourteen kg) |
50 | .625 in (fifteen.88 mm) | .400 in (ten.16 mm) | 4,880 lb (2,210 kg) | 49 lb (22 kg) |
60 | .750 in (19.05 mm) | .469 in (eleven.ninety one mm) | seven,030 lb (3,190 kg) | 70 lb (32 kg) |
eighty | one.000 in (25.forty mm) | .625 in (15.88 mm) | twelve,500 lb (5,seven hundred kg) | a hundred twenty five lb (57 kg) |
100 | 1.250 in (31.seventy five mm) | .750 in (19.05 mm) | 19,531 lb (8,859 kg) | 195 lb (88 kg) |
a hundred and twenty | one.five hundred in (38.10 mm) | .875 in (22.23 mm) | 28,125 lb (twelve,757 kg) | 281 lb (127 kg) |
one hundred forty | one.750 in (44.forty five mm) | one.000 in (25.forty mm) | 38,280 lb (seventeen,360 kg) | 383 lb (174 kg) |
a hundred and sixty | 2.000 in (50.eighty mm) | one.one hundred twenty five in (28.58 mm) | 50,000 lb (23,000 kg) | 500 lb (230 kg) |
one hundred eighty | two.250 in (fifty seven.fifteen mm) | one.460 in (37.08 mm) | sixty three,280 lb (28,seven hundred kg) | 633 lb (287 kg) |
two hundred | 2.500 in (63.50 mm) | 1.562 in (39.sixty seven mm) | 78,175 lb (35,460 kg) | 781 lb (354 kg) |
240 | three.000 in (76.twenty mm) | 1.875 in (47.sixty three mm) | 112,500 lb (fifty one,000 kg) | 1,000 lb (450 kg |
For mnemonic purposes, under is another presentation of essential dimensions from the very same common, expressed in fractions of an inch (which was part of the contemplating guiding the choice of preferred numbers in the ANSI regular):
Pitch (inches) | Pitch expressed in eighths |
ANSI common chain amount |
Width (inches) |
---|---|---|---|
one⁄4 | two⁄8 | two5 | one⁄eight |
3⁄eight | 3⁄8 | 3five | three⁄16 |
one⁄2 | 4⁄eight | 41 | 1⁄4 |
1⁄2 | 4⁄8 | 4 | 5⁄16 |
five⁄eight | 5⁄8 | 5 | three⁄eight |
three⁄four | 6⁄8 | 6 | 1⁄two |
one | eight⁄8 | 8 | five⁄8 |
Notes:
1. The pitch is the distance in between roller centers. The width is the distance among the website link plates (i.e. marginally a lot more than the roller width to enable for clearance).
two. The appropriate-hand digit of the common denotes 0 = standard chain, 1 = lightweight chain, 5 = rollerless bushing chain.
three. The still left-hand digit denotes the variety of eighths of an inch that make up the pitch.
four. An “H” adhering to the normal quantity denotes heavyweight chain. A hyphenated quantity pursuing the common number denotes double-strand (2), triple-strand (3), and so on. Hence 60H-3 denotes variety sixty heavyweight triple-strand chain.
A standard bicycle chain (for derailleur gears) makes use of slim 1⁄2-inch-pitch chain. The width of the chain is variable, and does not influence the load capacity. The more sprockets at the rear wheel (traditionally 3-6, presently 7-twelve sprockets), the narrower the chain. Chains are marketed in accordance to the quantity of speeds they are designed to perform with, for instance, “ten velocity chain”. Hub equipment or solitary velocity bicycles use 1/2″ x 1/8″ chains, in which 1/8″ refers to the highest thickness of a sprocket that can be utilized with the chain.
Generally chains with parallel formed links have an even amount of hyperlinks, with each slim link followed by a broad one particular. Chains created up with a uniform type of url, narrow at 1 and broad at the other end, can be made with an odd quantity of hyperlinks, which can be an advantage to adapt to a special chainwheel-length on the other aspect such a chain tends to be not so robust.
COMPANY PROFILE
Starmachinechina is a leading world-wide chain drive item supplier with the widest product variety. We have 5 point out-of-the-artwork production bases and regional distribution facilities and workshops in France, Germany, Netherlands, Thailand, Uk, Hungary and the United states of america. We has built a network of worldwide layout, R&D, production, revenue and market service. We have offered in excess of twelve,000 types
of chains for the world-wide market.
We focus on supplying large high quality items and convenient nearby provider.
Workshop
Certificates
Market place Community
Q:Why select us ?
A. we are a manufacturer, we have produced valve for more than 20 many years .
B. Reliable Top quality Assurance Method
C. Chopping-Edge Computer-Managed CNC Equipment
D. Bespoke Solutions from Very Experienced Specialists
E. Customization and OEM Accessible for Distinct Software
F. Substantial Inventory of Spare Parts and Add-ons
G. Properly-Created Globally Advertising and marketing Network
H. Effective After-Sale Support Program
Q. what is your payment time period?
A: thirty% TT deposit, 70% stability T/T before shipping and delivery.
Q:Can we print our brand on your items?
A: of course, we provide OEM/ODM provider, we support the personalized brand, dimensions, deal,and many others.
Q: Can you make chains in accordance to my CAD drawings?
A: Indeed. Apart from the standard regular chains, we produce non-common and custom-style products to satisfy the specific technical demands. In reality, a sizable portion of our manufacturing ability is assigned to make non-standard items.
Q: what is your principal market place?
A: North The united states, South America, Japanese Europe, Western Europe, Southeast Asia, Africa, Oceania, Mid East, Jap Asia,
Q: Can I get samples from your manufacturing unit?
A: Of course, Samples can be supplied.
Q: If products have some high quality issue, how would you offer with?
A: We will dependable for all the good quality troubles.
US $0.8 / Meter | |
10 Meters (Min. Order) |
###
Standard or Nonstandard: | Standard |
---|---|
Application: | Textile Machinery, Garment Machinery, Conveyer Equipment, Packaging Machinery, Electric Cars, Motorcycle, Food Machinery, Marine, Mining Equipment, Agricultural Machinery, Car |
Surface Treatment: | Polishing |
Structure: | Roller Chain |
Material: | Alloy |
Type: | Short Pitch Chain |
###
Samples: |
US$ 1/Meter
1 Meter(Min.Order) |
---|
###
Customization: |
Available
|
---|
###
ISO/ANSI/ DIN Chain No. |
Chain No. | Pitch P mm |
Roller diameter
d1max |
Width between inner plates b1min mm |
Pin diameter
d2max |
Pin length | Inner plate depth h2max mm |
Plate thickness Tmax mm |
Tensile strength
Qmin |
Average tensile strength Q0 kN |
Weight per meter q kg/m |
|
Lmax mm |
Lcmax mm |
|||||||||||
15 | *03C | 4.7625 | 2.48 | 2.38 | 1.62 | 6.10 | 6.90 | 4.30 | 0.60 | 1.80/409 | 2.0 | 0.08 |
*25 | *04C-1 | 6.3500 | 3.30 | 3.18 | 2.31 | 7.90 | 8.40 | 6.00 | 0.80 | 3.50/795 | 5.0 | 0.15 |
*35 | *06C-1 | 9.5250 | 5.08 | 4.77 | 3.58 | 12.40 | 13.17 | 9.00 | 1.30 | 7.90/1795 | 11.3 | 0.33 |
41 | 085-1 | 12.7000 | 7.77 | 6.25 | 3.58 | 13.75 | 15.00 | 9.91 | 1.30 | 6.67/1516 | 12.6 | 0.41 |
40 | 08A-1 | 12.7000 | 7.95 | 7.85 | 3.96 | 16.60 | 17.80 | 12.00 | 1.50 | 14.10/3205 | 18.6 | 0.62 |
50 | 10A-1 | 15.8750 | 10.16 | 9.40 | 5.08 | 20.70 | 22.20 | 15.09 | 2.03 | 22.20/5045 | 31.3 | 1.02 |
60 | 12A-1 | 19.0500 | 11.91 | 12.57 | 5.94 | 25.90 | 27.70 | 18.00 | 2.42 | 31.80/7227 | 43.2 | 1.50 |
80 | 16A-1 | 25.4000 | 15.88 | 15.75 | 7.92 | 32.70 | 35.00 | 24.00 | 3.25 | 56.70/12886 | 74.3 | 2.60 |
100 | 20A-1 | 31.7500 | 19.05 | 18.90 | 9.53 | 40.40 | 44.70 | 30.00 | 4.00 | 88.50/20114 | 107.6 | 3.91 |
120 | 24A-1 | 38.1000 | 22.23 | 25.22 | 11.10 | 50.30 | 54.30 | 35.70 | 4.80 | 127.00/28864 | 163.1 | 5.62 |
140 | 28A-1 | 44.4500 | 25.40 | 25.22 | 12.70 | 54.40 | 59.00 | 41.00 | 5.60 | 172.40/39182 | 222.5 | 7.50 |
160 | 32A-1 | 50.8000 | 28.58 | 31.55 | 14.27 | 64.80 | 69.60 | 47.80 | 6.40 | 226.80/51545 | 266.9 | 10.10 |
180 | 36A-1 | 57.1500 | 35.71 | 35.48 | 17.46 | 72.80 | 78.60 | 53.60 | 7.20 | 280.20/63682 | 361.1 | 13.45 |
200 | 40A-1 | 63.5000 | 39.68 | 37.85 | 19.85 | 80.30 | 87.20 | 60.00 | 8.00 | 353.80/80409 | 466.8 | 16.15 |
240 | 48A-1 | 76.2000 | 47.63 | 47.35 | 23.81 | 95.50 | 103.00 | 72.39 | 9.50 | 510.30/115977 | 671.6 | 23.20 |
###
ISO/ANSI/ DIN Chain No. |
Chain No. | Pitch
P |
Roller diameter
d1max |
Width between inner plates b1min mm |
Pin diameter
d2max |
Pin length | Inner plate depth h2max mm |
Plate thickness
Tmax |
Transverse pitch
Pt |
Tensile strength Qmin |
Average tensile strength Q0 kN |
Weight per meter q kg/m |
|
Lmax mm |
Lcmax mm |
||||||||||||
*25-2 | *04C-2 | 6.350 | 3.30 | 3.18 | 2.31 | 14.5 | 15.0 | 6.00 | 0.80 | 6.40 | 7.00/1591 | 10.0 | 0.28 |
*35-2 | *06C-2 | 9.525 | 5.08 | 4.77 | 3.58 | 22.5 | 23.3 | 9.00 | 1.30 | 10.13 | 15.80/3591 | 22.3 | 0.63 |
41-2 | 085-2 | 12.700 | 7.77 | 6.25 | 3.58 | 25.7 | 26.9 | 9.91 | 1.30 | 11.95 | 13.34/3032 | 16.9 | 0.81 |
40-2 | 08A-2 | 12.700 | 7.95 | 7.85 | 3.96 | 31.0 | 32.2 | 12.00 | 1.50 | 14.38 | 28.20/6409 | 37.2 | 1.12 |
50-2 | 10A-2 | 15.875 | 10.16 | 9.40 | 5.08 | 38.9 | 40.4 | 15.09 | 2.03 | 18.11 | 44.40/10091 | 62.6 | 2.00 |
60-2 | 12A-2 | 19.050 | 11.91 | 12.57 | 5.94 | 48.8 | 50.5 | 18.00 | 2.42 | 22.78 | 63.60/14455 | 86.4 | 2.92 |
80-2 | 16A-2 | 25.400 | 15.88 | 15.75 | 7.92 | 62.7 | 64.3 | 24.00 | 3.25 | 29.29 | 113.40/25773 | 148.6 | 5.15 |
100-2 | 20A-2 | 31.750 | 19.05 | 18.90 | 9.53 | 76.4 | 80.5 | 30.00 | 4.00 | 35.76 | 177.00/40227 | 215.2 | 7.80 |
120-2 | 24A-2 | 38.100 | 22.23 | 25.22 | 11.10 | 95.8 | 99.7 | 35.70 | 4.80 | 45.44 | 254.00/57727 | 326.2 | 11.70 |
140-2 | 28A-2 | 44.450 | 25.40 | 25.22 | 12.70 | 103.3 | 107.9 | 41.00 | 5.60 | 48.87 | 344.80/78364 | 445.0 | 15.14 |
160-2 | 32A-2 | 50.800 | 28.58 | 31.55 | 14.27 | 123.3 | 128.1 | 47.80 | 6.40 | 58.55 | 453.60/103091 | 533.8 | 20.14 |
180-2 | 36A-2 | 57.150 | 35.71 | 35.48 | 17.46 | 138.6 | 144.4 | 53.60 | 7.20 | 65.84 | 560.50/127386 | 722.2 | 29.22 |
200-2 | 40A-2 | 63.500 | 39.68 | 37.85 | 19.85 | 151.9 | 158.8 | 60.00 | 8.00 | 71.55 | 707.60/160818 | 933.6 | 32.24 |
240-2 | 48A-2 | 76.200 | 47.63 | 47.35 | 23.81 | 183.4 | 190.8 | 72.39 | 9.50 | 87.83 | 1020.60/213955 | 1343.2 | 45.23 |
###
ISO/DIN Chain No. |
Pitch
P |
Roller diameter
d1max |
Width between inner plates b1min mm |
Pin diameter
d2max |
Pin length | Inner plate depth h2max mm |
Plate thickness
t/Tmax |
Tensile strength
Qmin |
Average tensile strength
Q0 |
Weight per meter q kg/m |
|
Lmax mm |
Lcmax mm |
||||||||||
04 | 6.000 | 4.00 | 2.80 | 1.85 | 6.80 | 7.8 | 5.00 | 0.60 | 3.0/682 | 3.2 | 0.11 |
05B-1 | 8.000 | 5.00 | 3.00 | 2.31 | 8.20 | 8.9 | 7.10 | 0.80 | 5.0/1136 | 5.9 | 0.20 |
*06B-1 | 9.525 | 6.35 | 5.72 | 3.28 | 13.15 | 14.1 | 8.20 | 1.30 | 9.0/2045 | 10.4 | 0.41 |
08B-1 | 12.700 | 8.51 | 7.75 | 4.45 | 16.70 | 18.2 | 11.80 | 1.60 | 18.0/4091 | 19.4 | 0.69 |
10B-1 | 15.875 | 10.16 | 9.65 | 5.08 | 19.50 | 20.9 | 14.70 | 1.70 | 22.4/5091 | 27.5 | 0.93 |
12B-1 | 19.050 | 12.07 | 11.68 | 5.72 | 22.50 | 24.2 | 16.00 | 1.85 | 29.0/6591 | 32.2 | 1.15 |
16B-1 | 25.400 | 15.88 | 17.02 | 8.28 | 36.10 | 37.4 | 21.00 | 4.15/3.1 | 60.0/13636 | 77.1 | 2.71 |
20B-1 | 31.750 | 19.05 | 19.56 | 10.19 | 41.30 | 45.0 | 26.40 | 4.50/3.5 | 95.0/21591 | 112.8 | 3.70 |
24B-1 | 38.100 | 25.40 | 25.40 | 14.63 | 53.40 | 57.8 | 33.20 | 6.00/4.8 | 160.0/36364 | 178.0 | 7.10 |
28B-1 | 44.450 | 27.94 | 30.99 | 15.90 | 65.10 | 69.5 | 36.70 | 7.50/6.0 | 200.0/45455 | 236.4 | 8.50 |
32B-1 | 50.800 | 29.21 | 30.99 | 17.81 | 66.00 | 71.0 | 42.00 | 7.00/6.0 | 250.0/56818 | 277.5 | 10.25 |
40B-1 | 63.500 | 39.37 | 38.10 | 22.89 | 82.20 | 89.2 | 52.96 | 8.50/8.0 | 355.0/80682 | 394.0 | 16.35 |
48B-1 | 76.200 | 48.26 | 45.72 | 29.24 | 99.10 | 107.0 | 63.80 | 12.00/10.0 | 560.0/127272 | 621.6 | 25.00 |
56B-1 | 88.900 | 53.98 | 53.34 | 34.32 | 114.6 | 123.0 | 77.80 | 13.50/12.0 | 850.0/193180 | 940.0 | 35.78 |
64B-1 | 101.600 | 63.50 | 60.96 | 39.40 | 130.0 | 138.5 | 90.17 | 15.00/13.0 | 112.0/254544 | 1240.0 | 46.00 |
72B-1 | 114.300 | 72.39 | 68.58 | 44.48 | 147.4 | 156.4 | 103.60 | 17.00/15.0 | 1400.0/318180 | 1550.0 | 60.80 |
###
ISO/DIN Chain No. |
Pitch
P |
Roller diameter
d1max |
Width between inner plates b1min mm |
Pin diameter
d2 max |
Pin length | Inner plate depth h2max mm |
Plate thickness
t/Tmax |
Transverse pitch
Pt mm |
Tensile strength
Qmin |
Average tensile strength Q0 |
Weight per meter q kg/m |
|
Lmax mm |
Lcmax mm |
|||||||||||
05B-2 | 8.000 | 5.00 | 3.00 | 2.31 | 13.9 | 14.5 | 7.10 | 0.80 | 5.64 | 7.8/1773 | 10.2 | 0.33 |
*06B-2 | 9.525 | 6.35 | 5.72 | 3.28 | 23.4 | 24.4 | 8.20 | 1.30 | 10.24 | 16.9/3841 | 18.7 | 0.77 |
08B-2 | 12.700 | 8.51 | 7.75 | 4.45 | 31.0 | 32.2 | 11.80 | 1.60 | 13.92 | 32.0/7273 | 38.7 | 1.34 |
10B-2 | 15.875 | 10.16 | 9.65 | 5.08 | 36.1 | 37.5 | 14.70 | 1.70 | 16.59 | 44.5/10114 | 56.2 | 1.84 |
12B-2 | 19.050 | 12.07 | 11.68 | 5.72 | 42.0 | 43.6 | 16.00 | 1.85 | 19.46 | 57.8/13136 | 66.1 | 2.31 |
16B-2 | 25.400 | 15.88 | 17.02 | 8.28 | 68.0 | 69.3 | 21.00 | 4.15/3.1 | 31.88 | 106.0/24091 | 152.1 | 5.42 |
20B-2 | 31.750 | 19.05 | 19.56 | 10.19 | 77.8 | 81.5 | 26.40 | 4.50/3.5 | 36.45 | 170.0/38636 | 229.0 | 7.20 |
24B-2 | 38.100 | 25.40 | 25.40 | 14.63 | 101.7 | 106.2 | 33.20 | 6.00/4.8 | 48.36 | 280.0/63636 | 319.2 | 13.40 |
28B-2 | 44.450 | 27.94 | 30.99 | 15.90 | 124.6 | 129.1 | 36.70 | 7.50/6.0 | 59.56 | 360.0/81818 | 406.8 | 16.60 |
32B-2 | 50.800 | 29.21 | 30.99 | 17.81 | 124.6 | 129.6 | 42.00 | 7.00/6.0 | 58.55 | 450.0/102273 | 508.5 | 21.00 |
40B-2 | 63.500 | 39.37 | 38.10 | 22.89 | 154.5 | 161.5 | 52.96 | 8.50/8.0 | 72.29 | 630.0/143182 | 711.9 | 32.00 |
48B-2 | 76.200 | 48.26 | 45.72 | 29.24 | 190.4 | 198.2 | 63.80 | 12.00/10.0 | 91.21 | 1000.0/227272 | 1130.0 | 50.00 |
56B-2 | 88.900 | 53.98 | 53.34 | 34.32 | 221.2 | 229.6 | 77.80 | 13.50/12.0 | 106.60 | 1600.0/363635 | 1760.0 | 71.48 |
64B-2 | 101.600 | 63.50 | 60.96 | 39.40 | 249.9 | 258.4 | 90.17 | 15.00/13.0 | 119.89 | 2000.0/454544 | 2200.0 | 91.00 |
72B-2 | 114.300 | 72.39 | 68.58 | 44.48 | 283.7 | 292.7 | 103.60 | 17.00/15.0 | 136.27 | 2500.0/568180 | 2750.0 | 120.40 |
###
ISO/ANSI Chain No. |
Pitch
P |
Roller diameter
d1max |
Width between inner plates b1min mm |
Pin diameter
d2max |
Pin length | Inner plate depth h2max mm |
Plate thickness
Tmax |
Tensile strength
Qmin |
Average tensile strength Q0 kN |
Weight per meter q kg/m |
|
Lmax mm |
Lcmax mm |
||||||||||
*35H-1 | 9.525 | 5.08 | 4.77 | 3.58 | 13.3 | 14.3 | 9.00 | 1.50 | 7.9/1795 | 10.8 | 0.41 |
40H-1 | 12.700 | 7.95 | 7.85 | 3.96 | 18.8 | 19.9 | 12.00 | 2.03 | 14.1/3205 | 19.1 | 0.82 |
50H-1 | 15.875 | 10.16 | 9.40 | 5.08 | 22.1 | 23.4 | 15.09 | 2.42 | 22.2/5045 | 30.2 | 1.25 |
60H-1 | 19.050 | 11.91 | 12.57 | 5.94 | 29.2 | 31.0 | 18.00 | 3.25 | 31.8/7227 | 42.7 | 1.87 |
80H-1 | 25.400 | 15.88 | 15.75 | 7.92 | 36.2 | 37.7 | 24.00 | 4.00 | 56.7/12886 | 71.4 | 3.10 |
100H-1 | 31.750 | 19.05 | 18.90 | 9.53 | 43.6 | 46.9 | 30.00 | 4.80 | 88.5/20114 | 112.4 | 4.52 |
120H-1 | 38.100 | 22.23 | 25.22 | 11.10 | 53.5 | 57.5 | 35.70 | 5.60 | 127.0/28864 | 160.9 | 6.60 |
140H-1 | 44.450 | 25.40 | 25.22 | 12.70 | 57.6 | 62.2 | 41.00 | 6.40 | 172.4/39182 | 217.3 | 8.30 |
160H-1 | 50.800 | 28.58 | 31.55 | 14.27 | 68.2 | 73.0 | 47.80 | 7.20 | 226.8/51545 | 285.8 | 10.30 |
180H-1 | 57.150 | 35.71 | 35.48 | 17.46 | 75.9 | 81.6 | 53.60 | 8.00 | 281.0/63863 | 341.8 | 14.83 |
200H-1 | 63.500 | 39.68 | 37.85 | 19.85 | 86.6 | 93.5 | 60.00 | 9.50 | 353.8/80409 | 444.5 | 19.16 |
240H-1 | 76.200 | 47.63 | 47.35 | 23.81 | 109.6 | 115.9 | 72.30 | 12.70 | 510.3/115977 | 622.5 | 30.40 |
###
ISO/ANSI |
Pitch P mm |
Roller diameter
d1max |
Width between inner plates b1min mm |
Pin diameter
d2max |
Pin length | Inner plate depth h2max mm |
Plate thickness Tmax mm |
Transverse pitch
Pt mm |
Tensile strength Qmin kN/lbf |
Average tensile strength Q0 kN |
Weight per meter q kg/m |
|
Lmax mm |
Lcmax mm |
|||||||||||
60H-2 | 19.050 | 11.91 | 12.57 | 5.94 | 55.3 | 57.1 | 18.00 | 3.25 | 26.11 | 63.6/14455 | 84.5 | 3.71 |
80H-2 | 25.400 | 15.88 | 15.75 | 7.92 | 68.8 | 70.3 | 24.00 | 4.00 | 32.59 | 113.4/25773 | 145.3 | 6.15 |
100H-2 | 31.750 | 19.05 | 18.90 | 9.53 | 82.7 | 86.0 | 30.00 | 4.80 | 39.09 | 177.0/40227 | 225.9 | 9.03 |
120H-2 | 38.100 | 22.23 | 25.22 | 11.10 | 102.4 | 106.4 | 35.70 | 5.60 | 48.87 | 254.0/57727 | 322.7 | 13.13 |
140H-2 | 44.450 | 25.40 | 25.22 | 12.70 | 109.8 | 114.4 | 41.00 | 6.40 | 52.20 | 344.8/78364 | 437.7 | 16.60 |
160H-2 | 50.800 | 28.58 | 31.55 | 14.27 | 130.1 | 134.9 | 47.80 | 7.20 | 61.90 | 453.6/103091 | 571.6 | 20.20 |
180H-2 | 57.150 | 35.71 | 35.48 | 17.46 | 146.5 | 155.6 | 53.60 | 8.00 | 69.16 | 562/127726 | 680.0 | 29.20 |
200H-2 | 63.500 | 39.68 | 37.85 | 19.85 | 164.9 | 171.8 | 60.00 | 9.50 | 78.31 | 707.6/160818 | 894.9 | 38.11 |
240H-2 | 76.200 | 47.63 | 47.35 | 23.81 | 212.6 | 223.1 | 72.30 | 12.70 | 101.22 | 1000/227270 | 1200.0 | 60.50 |
###
ASME/ANSI B29.1-2011 Roller Chain Standard Sizes | ||||
Size | Pitch | Maximum Roller Diameter | Minimum Ultimate Tensile Strength | Measuring Load |
---|---|---|---|---|
25 | 0.250 in (6.35 mm) | 0.130 in (3.30 mm) | 780 lb (350 kg) | 18 lb (8.2 kg) |
35 | 0.375 in (9.53 mm) | 0.200 in (5.08 mm) | 1,760 lb (800 kg) | 18 lb (8.2 kg) |
41 | 0.500 in (12.70 mm) | 0.306 in (7.77 mm) | 1,500 lb (680 kg) | 18 lb (8.2 kg) |
40 | 0.500 in (12.70 mm) | 0.312 in (7.92 mm) | 3,125 lb (1,417 kg) | 31 lb (14 kg) |
50 | 0.625 in (15.88 mm) | 0.400 in (10.16 mm) | 4,880 lb (2,210 kg) | 49 lb (22 kg) |
60 | 0.750 in (19.05 mm) | 0.469 in (11.91 mm) | 7,030 lb (3,190 kg) | 70 lb (32 kg) |
80 | 1.000 in (25.40 mm) | 0.625 in (15.88 mm) | 12,500 lb (5,700 kg) | 125 lb (57 kg) |
100 | 1.250 in (31.75 mm) | 0.750 in (19.05 mm) | 19,531 lb (8,859 kg) | 195 lb (88 kg) |
120 | 1.500 in (38.10 mm) | 0.875 in (22.23 mm) | 28,125 lb (12,757 kg) | 281 lb (127 kg) |
140 | 1.750 in (44.45 mm) | 1.000 in (25.40 mm) | 38,280 lb (17,360 kg) | 383 lb (174 kg) |
160 | 2.000 in (50.80 mm) | 1.125 in (28.58 mm) | 50,000 lb (23,000 kg) | 500 lb (230 kg) |
180 | 2.250 in (57.15 mm) | 1.460 in (37.08 mm) | 63,280 lb (28,700 kg) | 633 lb (287 kg) |
200 | 2.500 in (63.50 mm) | 1.562 in (39.67 mm) | 78,175 lb (35,460 kg) | 781 lb (354 kg) |
240 | 3.000 in (76.20 mm) | 1.875 in (47.63 mm) | 112,500 lb (51,000 kg) | 1,000 lb (450 kg |
###
Pitch (inches) | Pitch expressed in eighths |
ANSI standard chain number |
Width (inches) |
---|---|---|---|
1⁄4 | 2⁄8 | 25 | 1⁄8 |
3⁄8 | 3⁄8 | 35 | 3⁄16 |
1⁄2 | 4⁄8 | 41 | 1⁄4 |
1⁄2 | 4⁄8 | 40 | 5⁄16 |
5⁄8 | 5⁄8 | 50 | 3⁄8 |
3⁄4 | 6⁄8 | 60 | 1⁄2 |
1 | 8⁄8 | 80 | 5⁄8 |
US $0.8 / Meter | |
10 Meters (Min. Order) |
###
Standard or Nonstandard: | Standard |
---|---|
Application: | Textile Machinery, Garment Machinery, Conveyer Equipment, Packaging Machinery, Electric Cars, Motorcycle, Food Machinery, Marine, Mining Equipment, Agricultural Machinery, Car |
Surface Treatment: | Polishing |
Structure: | Roller Chain |
Material: | Alloy |
Type: | Short Pitch Chain |
###
Samples: |
US$ 1/Meter
1 Meter(Min.Order) |
---|
###
Customization: |
Available
|
---|
###
ISO/ANSI/ DIN Chain No. |
Chain No. | Pitch P mm |
Roller diameter
d1max |
Width between inner plates b1min mm |
Pin diameter
d2max |
Pin length | Inner plate depth h2max mm |
Plate thickness Tmax mm |
Tensile strength
Qmin |
Average tensile strength Q0 kN |
Weight per meter q kg/m |
|
Lmax mm |
Lcmax mm |
|||||||||||
15 | *03C | 4.7625 | 2.48 | 2.38 | 1.62 | 6.10 | 6.90 | 4.30 | 0.60 | 1.80/409 | 2.0 | 0.08 |
*25 | *04C-1 | 6.3500 | 3.30 | 3.18 | 2.31 | 7.90 | 8.40 | 6.00 | 0.80 | 3.50/795 | 5.0 | 0.15 |
*35 | *06C-1 | 9.5250 | 5.08 | 4.77 | 3.58 | 12.40 | 13.17 | 9.00 | 1.30 | 7.90/1795 | 11.3 | 0.33 |
41 | 085-1 | 12.7000 | 7.77 | 6.25 | 3.58 | 13.75 | 15.00 | 9.91 | 1.30 | 6.67/1516 | 12.6 | 0.41 |
40 | 08A-1 | 12.7000 | 7.95 | 7.85 | 3.96 | 16.60 | 17.80 | 12.00 | 1.50 | 14.10/3205 | 18.6 | 0.62 |
50 | 10A-1 | 15.8750 | 10.16 | 9.40 | 5.08 | 20.70 | 22.20 | 15.09 | 2.03 | 22.20/5045 | 31.3 | 1.02 |
60 | 12A-1 | 19.0500 | 11.91 | 12.57 | 5.94 | 25.90 | 27.70 | 18.00 | 2.42 | 31.80/7227 | 43.2 | 1.50 |
80 | 16A-1 | 25.4000 | 15.88 | 15.75 | 7.92 | 32.70 | 35.00 | 24.00 | 3.25 | 56.70/12886 | 74.3 | 2.60 |
100 | 20A-1 | 31.7500 | 19.05 | 18.90 | 9.53 | 40.40 | 44.70 | 30.00 | 4.00 | 88.50/20114 | 107.6 | 3.91 |
120 | 24A-1 | 38.1000 | 22.23 | 25.22 | 11.10 | 50.30 | 54.30 | 35.70 | 4.80 | 127.00/28864 | 163.1 | 5.62 |
140 | 28A-1 | 44.4500 | 25.40 | 25.22 | 12.70 | 54.40 | 59.00 | 41.00 | 5.60 | 172.40/39182 | 222.5 | 7.50 |
160 | 32A-1 | 50.8000 | 28.58 | 31.55 | 14.27 | 64.80 | 69.60 | 47.80 | 6.40 | 226.80/51545 | 266.9 | 10.10 |
180 | 36A-1 | 57.1500 | 35.71 | 35.48 | 17.46 | 72.80 | 78.60 | 53.60 | 7.20 | 280.20/63682 | 361.1 | 13.45 |
200 | 40A-1 | 63.5000 | 39.68 | 37.85 | 19.85 | 80.30 | 87.20 | 60.00 | 8.00 | 353.80/80409 | 466.8 | 16.15 |
240 | 48A-1 | 76.2000 | 47.63 | 47.35 | 23.81 | 95.50 | 103.00 | 72.39 | 9.50 | 510.30/115977 | 671.6 | 23.20 |
###
ISO/ANSI/ DIN Chain No. |
Chain No. | Pitch
P |
Roller diameter
d1max |
Width between inner plates b1min mm |
Pin diameter
d2max |
Pin length | Inner plate depth h2max mm |
Plate thickness
Tmax |
Transverse pitch
Pt |
Tensile strength Qmin |
Average tensile strength Q0 kN |
Weight per meter q kg/m |
|
Lmax mm |
Lcmax mm |
||||||||||||
*25-2 | *04C-2 | 6.350 | 3.30 | 3.18 | 2.31 | 14.5 | 15.0 | 6.00 | 0.80 | 6.40 | 7.00/1591 | 10.0 | 0.28 |
*35-2 | *06C-2 | 9.525 | 5.08 | 4.77 | 3.58 | 22.5 | 23.3 | 9.00 | 1.30 | 10.13 | 15.80/3591 | 22.3 | 0.63 |
41-2 | 085-2 | 12.700 | 7.77 | 6.25 | 3.58 | 25.7 | 26.9 | 9.91 | 1.30 | 11.95 | 13.34/3032 | 16.9 | 0.81 |
40-2 | 08A-2 | 12.700 | 7.95 | 7.85 | 3.96 | 31.0 | 32.2 | 12.00 | 1.50 | 14.38 | 28.20/6409 | 37.2 | 1.12 |
50-2 | 10A-2 | 15.875 | 10.16 | 9.40 | 5.08 | 38.9 | 40.4 | 15.09 | 2.03 | 18.11 | 44.40/10091 | 62.6 | 2.00 |
60-2 | 12A-2 | 19.050 | 11.91 | 12.57 | 5.94 | 48.8 | 50.5 | 18.00 | 2.42 | 22.78 | 63.60/14455 | 86.4 | 2.92 |
80-2 | 16A-2 | 25.400 | 15.88 | 15.75 | 7.92 | 62.7 | 64.3 | 24.00 | 3.25 | 29.29 | 113.40/25773 | 148.6 | 5.15 |
100-2 | 20A-2 | 31.750 | 19.05 | 18.90 | 9.53 | 76.4 | 80.5 | 30.00 | 4.00 | 35.76 | 177.00/40227 | 215.2 | 7.80 |
120-2 | 24A-2 | 38.100 | 22.23 | 25.22 | 11.10 | 95.8 | 99.7 | 35.70 | 4.80 | 45.44 | 254.00/57727 | 326.2 | 11.70 |
140-2 | 28A-2 | 44.450 | 25.40 | 25.22 | 12.70 | 103.3 | 107.9 | 41.00 | 5.60 | 48.87 | 344.80/78364 | 445.0 | 15.14 |
160-2 | 32A-2 | 50.800 | 28.58 | 31.55 | 14.27 | 123.3 | 128.1 | 47.80 | 6.40 | 58.55 | 453.60/103091 | 533.8 | 20.14 |
180-2 | 36A-2 | 57.150 | 35.71 | 35.48 | 17.46 | 138.6 | 144.4 | 53.60 | 7.20 | 65.84 | 560.50/127386 | 722.2 | 29.22 |
200-2 | 40A-2 | 63.500 | 39.68 | 37.85 | 19.85 | 151.9 | 158.8 | 60.00 | 8.00 | 71.55 | 707.60/160818 | 933.6 | 32.24 |
240-2 | 48A-2 | 76.200 | 47.63 | 47.35 | 23.81 | 183.4 | 190.8 | 72.39 | 9.50 | 87.83 | 1020.60/213955 | 1343.2 | 45.23 |
###
ISO/DIN Chain No. |
Pitch
P |
Roller diameter
d1max |
Width between inner plates b1min mm |
Pin diameter
d2max |
Pin length | Inner plate depth h2max mm |
Plate thickness
t/Tmax |
Tensile strength
Qmin |
Average tensile strength
Q0 |
Weight per meter q kg/m |
|
Lmax mm |
Lcmax mm |
||||||||||
04 | 6.000 | 4.00 | 2.80 | 1.85 | 6.80 | 7.8 | 5.00 | 0.60 | 3.0/682 | 3.2 | 0.11 |
05B-1 | 8.000 | 5.00 | 3.00 | 2.31 | 8.20 | 8.9 | 7.10 | 0.80 | 5.0/1136 | 5.9 | 0.20 |
*06B-1 | 9.525 | 6.35 | 5.72 | 3.28 | 13.15 | 14.1 | 8.20 | 1.30 | 9.0/2045 | 10.4 | 0.41 |
08B-1 | 12.700 | 8.51 | 7.75 | 4.45 | 16.70 | 18.2 | 11.80 | 1.60 | 18.0/4091 | 19.4 | 0.69 |
10B-1 | 15.875 | 10.16 | 9.65 | 5.08 | 19.50 | 20.9 | 14.70 | 1.70 | 22.4/5091 | 27.5 | 0.93 |
12B-1 | 19.050 | 12.07 | 11.68 | 5.72 | 22.50 | 24.2 | 16.00 | 1.85 | 29.0/6591 | 32.2 | 1.15 |
16B-1 | 25.400 | 15.88 | 17.02 | 8.28 | 36.10 | 37.4 | 21.00 | 4.15/3.1 | 60.0/13636 | 77.1 | 2.71 |
20B-1 | 31.750 | 19.05 | 19.56 | 10.19 | 41.30 | 45.0 | 26.40 | 4.50/3.5 | 95.0/21591 | 112.8 | 3.70 |
24B-1 | 38.100 | 25.40 | 25.40 | 14.63 | 53.40 | 57.8 | 33.20 | 6.00/4.8 | 160.0/36364 | 178.0 | 7.10 |
28B-1 | 44.450 | 27.94 | 30.99 | 15.90 | 65.10 | 69.5 | 36.70 | 7.50/6.0 | 200.0/45455 | 236.4 | 8.50 |
32B-1 | 50.800 | 29.21 | 30.99 | 17.81 | 66.00 | 71.0 | 42.00 | 7.00/6.0 | 250.0/56818 | 277.5 | 10.25 |
40B-1 | 63.500 | 39.37 | 38.10 | 22.89 | 82.20 | 89.2 | 52.96 | 8.50/8.0 | 355.0/80682 | 394.0 | 16.35 |
48B-1 | 76.200 | 48.26 | 45.72 | 29.24 | 99.10 | 107.0 | 63.80 | 12.00/10.0 | 560.0/127272 | 621.6 | 25.00 |
56B-1 | 88.900 | 53.98 | 53.34 | 34.32 | 114.6 | 123.0 | 77.80 | 13.50/12.0 | 850.0/193180 | 940.0 | 35.78 |
64B-1 | 101.600 | 63.50 | 60.96 | 39.40 | 130.0 | 138.5 | 90.17 | 15.00/13.0 | 112.0/254544 | 1240.0 | 46.00 |
72B-1 | 114.300 | 72.39 | 68.58 | 44.48 | 147.4 | 156.4 | 103.60 | 17.00/15.0 | 1400.0/318180 | 1550.0 | 60.80 |
###
ISO/DIN Chain No. |
Pitch
P |
Roller diameter
d1max |
Width between inner plates b1min mm |
Pin diameter
d2 max |
Pin length | Inner plate depth h2max mm |
Plate thickness
t/Tmax |
Transverse pitch
Pt mm |
Tensile strength
Qmin |
Average tensile strength Q0 |
Weight per meter q kg/m |
|
Lmax mm |
Lcmax mm |
|||||||||||
05B-2 | 8.000 | 5.00 | 3.00 | 2.31 | 13.9 | 14.5 | 7.10 | 0.80 | 5.64 | 7.8/1773 | 10.2 | 0.33 |
*06B-2 | 9.525 | 6.35 | 5.72 | 3.28 | 23.4 | 24.4 | 8.20 | 1.30 | 10.24 | 16.9/3841 | 18.7 | 0.77 |
08B-2 | 12.700 | 8.51 | 7.75 | 4.45 | 31.0 | 32.2 | 11.80 | 1.60 | 13.92 | 32.0/7273 | 38.7 | 1.34 |
10B-2 | 15.875 | 10.16 | 9.65 | 5.08 | 36.1 | 37.5 | 14.70 | 1.70 | 16.59 | 44.5/10114 | 56.2 | 1.84 |
12B-2 | 19.050 | 12.07 | 11.68 | 5.72 | 42.0 | 43.6 | 16.00 | 1.85 | 19.46 | 57.8/13136 | 66.1 | 2.31 |
16B-2 | 25.400 | 15.88 | 17.02 | 8.28 | 68.0 | 69.3 | 21.00 | 4.15/3.1 | 31.88 | 106.0/24091 | 152.1 | 5.42 |
20B-2 | 31.750 | 19.05 | 19.56 | 10.19 | 77.8 | 81.5 | 26.40 | 4.50/3.5 | 36.45 | 170.0/38636 | 229.0 | 7.20 |
24B-2 | 38.100 | 25.40 | 25.40 | 14.63 | 101.7 | 106.2 | 33.20 | 6.00/4.8 | 48.36 | 280.0/63636 | 319.2 | 13.40 |
28B-2 | 44.450 | 27.94 | 30.99 | 15.90 | 124.6 | 129.1 | 36.70 | 7.50/6.0 | 59.56 | 360.0/81818 | 406.8 | 16.60 |
32B-2 | 50.800 | 29.21 | 30.99 | 17.81 | 124.6 | 129.6 | 42.00 | 7.00/6.0 | 58.55 | 450.0/102273 | 508.5 | 21.00 |
40B-2 | 63.500 | 39.37 | 38.10 | 22.89 | 154.5 | 161.5 | 52.96 | 8.50/8.0 | 72.29 | 630.0/143182 | 711.9 | 32.00 |
48B-2 | 76.200 | 48.26 | 45.72 | 29.24 | 190.4 | 198.2 | 63.80 | 12.00/10.0 | 91.21 | 1000.0/227272 | 1130.0 | 50.00 |
56B-2 | 88.900 | 53.98 | 53.34 | 34.32 | 221.2 | 229.6 | 77.80 | 13.50/12.0 | 106.60 | 1600.0/363635 | 1760.0 | 71.48 |
64B-2 | 101.600 | 63.50 | 60.96 | 39.40 | 249.9 | 258.4 | 90.17 | 15.00/13.0 | 119.89 | 2000.0/454544 | 2200.0 | 91.00 |
72B-2 | 114.300 | 72.39 | 68.58 | 44.48 | 283.7 | 292.7 | 103.60 | 17.00/15.0 | 136.27 | 2500.0/568180 | 2750.0 | 120.40 |
###
ISO/ANSI Chain No. |
Pitch
P |
Roller diameter
d1max |
Width between inner plates b1min mm |
Pin diameter
d2max |
Pin length | Inner plate depth h2max mm |
Plate thickness
Tmax |
Tensile strength
Qmin |
Average tensile strength Q0 kN |
Weight per meter q kg/m |
|
Lmax mm |
Lcmax mm |
||||||||||
*35H-1 | 9.525 | 5.08 | 4.77 | 3.58 | 13.3 | 14.3 | 9.00 | 1.50 | 7.9/1795 | 10.8 | 0.41 |
40H-1 | 12.700 | 7.95 | 7.85 | 3.96 | 18.8 | 19.9 | 12.00 | 2.03 | 14.1/3205 | 19.1 | 0.82 |
50H-1 | 15.875 | 10.16 | 9.40 | 5.08 | 22.1 | 23.4 | 15.09 | 2.42 | 22.2/5045 | 30.2 | 1.25 |
60H-1 | 19.050 | 11.91 | 12.57 | 5.94 | 29.2 | 31.0 | 18.00 | 3.25 | 31.8/7227 | 42.7 | 1.87 |
80H-1 | 25.400 | 15.88 | 15.75 | 7.92 | 36.2 | 37.7 | 24.00 | 4.00 | 56.7/12886 | 71.4 | 3.10 |
100H-1 | 31.750 | 19.05 | 18.90 | 9.53 | 43.6 | 46.9 | 30.00 | 4.80 | 88.5/20114 | 112.4 | 4.52 |
120H-1 | 38.100 | 22.23 | 25.22 | 11.10 | 53.5 | 57.5 | 35.70 | 5.60 | 127.0/28864 | 160.9 | 6.60 |
140H-1 | 44.450 | 25.40 | 25.22 | 12.70 | 57.6 | 62.2 | 41.00 | 6.40 | 172.4/39182 | 217.3 | 8.30 |
160H-1 | 50.800 | 28.58 | 31.55 | 14.27 | 68.2 | 73.0 | 47.80 | 7.20 | 226.8/51545 | 285.8 | 10.30 |
180H-1 | 57.150 | 35.71 | 35.48 | 17.46 | 75.9 | 81.6 | 53.60 | 8.00 | 281.0/63863 | 341.8 | 14.83 |
200H-1 | 63.500 | 39.68 | 37.85 | 19.85 | 86.6 | 93.5 | 60.00 | 9.50 | 353.8/80409 | 444.5 | 19.16 |
240H-1 | 76.200 | 47.63 | 47.35 | 23.81 | 109.6 | 115.9 | 72.30 | 12.70 | 510.3/115977 | 622.5 | 30.40 |
###
ISO/ANSI |
Pitch P mm |
Roller diameter
d1max |
Width between inner plates b1min mm |
Pin diameter
d2max |
Pin length | Inner plate depth h2max mm |
Plate thickness Tmax mm |
Transverse pitch
Pt mm |
Tensile strength Qmin kN/lbf |
Average tensile strength Q0 kN |
Weight per meter q kg/m |
|
Lmax mm |
Lcmax mm |
|||||||||||
60H-2 | 19.050 | 11.91 | 12.57 | 5.94 | 55.3 | 57.1 | 18.00 | 3.25 | 26.11 | 63.6/14455 | 84.5 | 3.71 |
80H-2 | 25.400 | 15.88 | 15.75 | 7.92 | 68.8 | 70.3 | 24.00 | 4.00 | 32.59 | 113.4/25773 | 145.3 | 6.15 |
100H-2 | 31.750 | 19.05 | 18.90 | 9.53 | 82.7 | 86.0 | 30.00 | 4.80 | 39.09 | 177.0/40227 | 225.9 | 9.03 |
120H-2 | 38.100 | 22.23 | 25.22 | 11.10 | 102.4 | 106.4 | 35.70 | 5.60 | 48.87 | 254.0/57727 | 322.7 | 13.13 |
140H-2 | 44.450 | 25.40 | 25.22 | 12.70 | 109.8 | 114.4 | 41.00 | 6.40 | 52.20 | 344.8/78364 | 437.7 | 16.60 |
160H-2 | 50.800 | 28.58 | 31.55 | 14.27 | 130.1 | 134.9 | 47.80 | 7.20 | 61.90 | 453.6/103091 | 571.6 | 20.20 |
180H-2 | 57.150 | 35.71 | 35.48 | 17.46 | 146.5 | 155.6 | 53.60 | 8.00 | 69.16 | 562/127726 | 680.0 | 29.20 |
200H-2 | 63.500 | 39.68 | 37.85 | 19.85 | 164.9 | 171.8 | 60.00 | 9.50 | 78.31 | 707.6/160818 | 894.9 | 38.11 |
240H-2 | 76.200 | 47.63 | 47.35 | 23.81 | 212.6 | 223.1 | 72.30 | 12.70 | 101.22 | 1000/227270 | 1200.0 | 60.50 |
###
ASME/ANSI B29.1-2011 Roller Chain Standard Sizes | ||||
Size | Pitch | Maximum Roller Diameter | Minimum Ultimate Tensile Strength | Measuring Load |
---|---|---|---|---|
25 | 0.250 in (6.35 mm) | 0.130 in (3.30 mm) | 780 lb (350 kg) | 18 lb (8.2 kg) |
35 | 0.375 in (9.53 mm) | 0.200 in (5.08 mm) | 1,760 lb (800 kg) | 18 lb (8.2 kg) |
41 | 0.500 in (12.70 mm) | 0.306 in (7.77 mm) | 1,500 lb (680 kg) | 18 lb (8.2 kg) |
40 | 0.500 in (12.70 mm) | 0.312 in (7.92 mm) | 3,125 lb (1,417 kg) | 31 lb (14 kg) |
50 | 0.625 in (15.88 mm) | 0.400 in (10.16 mm) | 4,880 lb (2,210 kg) | 49 lb (22 kg) |
60 | 0.750 in (19.05 mm) | 0.469 in (11.91 mm) | 7,030 lb (3,190 kg) | 70 lb (32 kg) |
80 | 1.000 in (25.40 mm) | 0.625 in (15.88 mm) | 12,500 lb (5,700 kg) | 125 lb (57 kg) |
100 | 1.250 in (31.75 mm) | 0.750 in (19.05 mm) | 19,531 lb (8,859 kg) | 195 lb (88 kg) |
120 | 1.500 in (38.10 mm) | 0.875 in (22.23 mm) | 28,125 lb (12,757 kg) | 281 lb (127 kg) |
140 | 1.750 in (44.45 mm) | 1.000 in (25.40 mm) | 38,280 lb (17,360 kg) | 383 lb (174 kg) |
160 | 2.000 in (50.80 mm) | 1.125 in (28.58 mm) | 50,000 lb (23,000 kg) | 500 lb (230 kg) |
180 | 2.250 in (57.15 mm) | 1.460 in (37.08 mm) | 63,280 lb (28,700 kg) | 633 lb (287 kg) |
200 | 2.500 in (63.50 mm) | 1.562 in (39.67 mm) | 78,175 lb (35,460 kg) | 781 lb (354 kg) |
240 | 3.000 in (76.20 mm) | 1.875 in (47.63 mm) | 112,500 lb (51,000 kg) | 1,000 lb (450 kg |
###
Pitch (inches) | Pitch expressed in eighths |
ANSI standard chain number |
Width (inches) |
---|---|---|---|
1⁄4 | 2⁄8 | 25 | 1⁄8 |
3⁄8 | 3⁄8 | 35 | 3⁄16 |
1⁄2 | 4⁄8 | 41 | 1⁄4 |
1⁄2 | 4⁄8 | 40 | 5⁄16 |
5⁄8 | 5⁄8 | 50 | 3⁄8 |
3⁄4 | 6⁄8 | 60 | 1⁄2 |
1 | 8⁄8 | 80 | 5⁄8 |
What is a drive chain?
A drive chain is a wheeled device that transmits power from one gear to another. The drive chain is usually an oval ring around a corner or worm gear. On the other hand, idler pulleys do not transmit power and are not used to move the chain. In some cases, drive chains can be used with idler pulleys to transport objects. This allows the drive chain to recover some power from the second gear.
conveyor chain
There are many types of conveyor chains to choose from. One type is a closed joint chain. It consists of the barrel and connecting rod, made from a single casting and heat-treated for high strength and durability. Conveyor chains typically have low running speeds and are typically made of malleable iron. Another type of chain is the power transmission chain, which is used to transmit mechanical power. They feature efficient lubrication and are stronger than conventional conveyor chains.
Roller chain pitches can range from half an inch to a third of an inch. They are available in steel and nickel-plated steel. They can be used with inline or staggered rollers and can be designed with different pitch levels. They can also have bushings between the chainplates or gaps between the teeth to increase their maximum spacing. When choosing a conveyor chain, remember to properly lubricate bearing surfaces to minimize power absorption, wear, and corrosion. Mineral oils of medium viscosity are suitable for normal operating temperatures. SAE 20W50 is suitable. Manufacturers also offer self-lubricating chains.
Conveyor chains are used in many industries. The automotive industry has traditionally used these chains for bulk transport. Their reliability and low cost make them an excellent choice for a variety of applications. CZPT Chains offers stainless steel and CZPT conveyor chains to meet your unique requirements. If you’re in the market for a new conveyor, don’t forget to shop around. CZPT Chain can help you find the perfect one.
The regular drive version consists of an ASME/ANSI roller chain wrapped around a driven sprocket. It can also be configured for variable rpm. The gear ratio between the two parts determines the reduction or increase in speed. In some cases, solution chains can be used. Roller chains are more efficient. Then, there are solutions for both cases. There are many types of conveyor chains to choose from.
Conveyor chain pitch also plays an important role in performance. The smaller the pitch of the chain, the faster it spins. On the other hand, a smaller pitch will require more teeth on the sprocket, which means more links will be engaged during the movement. This smaller articulation angle also produces smoother motion. It also reduces vibration. Therefore, CZPT Chains can be trusted for a long time.
roller chain
The performance of a drive chain depends on how well it is maintained and lubricated. Careful attention to detail is required when selecting a roller chain, which is one of the most important components in a drive chain. Its proper lubrication and assembly will significantly affect its wear life. Here are some important tips to follow when buying a roller chain:
The size of the drive chain should be selected according to the sprockets used. The large sprocket should have at least 25 teeth, and the small sprocket should have fewer teeth. The pitch of a drive chain is the contact angle between the chain and the sprocket. The smaller the sprocket, the smaller the contact angle of the two parts. Larger sprockets are better, but smaller sprockets must never have fewer teeth.
When purchasing a roller chain, be sure to consider the maximum speed of the small sprocket. This will determine how much lubrication you need. Different lubrication systems have different requirements. Manual lubrication limits how many feet per minute the drive chain can run, while oil bath lubrication can get you up to 1100 ft/min. The only way to maximize drive chain speed is to purchase a pump lubrication system.
Once you have the right length, you can determine if you need a new one. To do this you have to move the axis to measure the length. Once the length is determined, the drive chain should be removed from the sprocket and measured using the ANSI specified measuring load. You should also follow safety guidelines when measuring your chain. If you want to maximize the life of your drive chain, be sure to follow these tips.
Another important consideration is the type of environment you operate in. For applications that need to avoid rubbing steel rails, it is best to use a roller chain that can withstand a clean indoor environment. Although roller chains are generally more durable, they must be stored properly to avoid corrosion. If you care about the environment, consider opting for double chain. Its durability and low maintenance costs will make it a valuable investment in your business.
closed pivot
Closed-end pivot drive chains are used in a variety of applications. They are known for their durability, high strength, and long life. They are available in a variety of grades, including grade 400, grade 600, and grade 800 pivots, which can withstand the high forces required for certain applications. Enclosed pivot chains can be used to lift, pull, convey and transfer heavy loads.
Class 400 closed-end pivot chain features one-piece cast offset link construction. Steel pins connect each link and are prevented from rotating by head stops. This design allows the pin to connect inside the barrel without breaking. This type of chain is the most commonly used and has the highest durability. In addition to being extremely durable, it offers long-lasting performance and smooth operation.
Another closed-end pivot conveyor chain drive is called a power drive chain. These chains consist of barrels and links used to transmit rotation from one shaft to another. The barrels of the closed-end pivot chains are made of steel, which allows them to run easily on the sprockets. Block drive chains are used for low-speed applications, but they can be noisy when the chain is in contact with the sprockets.
The enclosed pivot drive chain has rollers on both ends to minimize wear. These chains are usually made of steel and can be used in areas where high-speed power transmission is required. They are also available in heavy-duty versions. Unlike other types of chains, steel pivot chains are designed for a variety of applications. They are suitable for heavy-duty applications and their open barrel design allows for minimal contact with the pins in the barrel and the root of the sprocket.
Linear chain
CZPT is an important part of linear drive technology. This type of chain is capable of delivering real power in tight spaces. Typically, loads are moved by pulling or pushing. CZPT can perform both types of movements. They can push and pull additional loads. This type of chain can also be wound and stored in the magazine. It is a popular choice for small machine tools and many other uses.
Unlike traditional mechanical chains, CZPT uses a push-pull strategy to move heavy objects. It is a rigid locking design that prevents kinking and allows the chain to transmit force without bending. The CZPT is an excellent choice for moving large loads and is particularly versatile in power transmission. However, CZPT is more expensive than traditional drive chain options.
The service life of a linear chain depends on its design, material type and size. You may want to buy a good quality chain, but it’s not necessary in all cases. While superior quality can extend the life of the chain, it may not be necessary for low-speed drives or very light shock loads. If you’re not dealing with high-velocity shock loads, you probably don’t need features like oil reservoirs or bushing grooves.
The size of the drive sprocket can have a major impact on the overall life of the linear chain. It determines how fast the chain can go and how much horsepower it can produce. An 11-tooth chain will hit about half its rated speed, but only about 30 percent of its rated horsepower. You can extend the life of your linear chain by choosing a drive sprocket with a higher number of teeth. It is best to choose a drive sprocket with a high number of teeth, but make sure the number of teeth is even. This will ensure that your chain wear is evenly distributed.
editor by czh 2022-11-26